XL Specialized 48' Hydraulic Tail

XL Specialized 48' Hydraulic Power Tail

Deposit: $5,000 to start deposit 

 

With a load angle of 10 degrees, the hydraulic tail is equipped to easily handle hard- to-load equipment such as man lifts, rollers, forklifts and paving equipment. The tail features a lifting capacity of 25,000 pounds for loads centered on the main platform.

  • Planetary drive 18,000 lb hydraulic winch with 75’ of 1/2” cable and an air kick out

  • A 9’ pop-up ramp from deck to neck allows for easy loading onto the neck.

  • Work light at rear of the gooseneck for loading and unloading in the dark.

  • A foot hole and grab handle on each side of the gooseneck assist in climbing onto the deck.

  • A 2 function wireless remote comes standard, other remote options are available

  • Tail hinge points stay clean thanks to lug style hinges. These hinges prevent debris from accumulating.

  • The tail is comprised of two sections – an 8-foot 8-inch platform ramp and a 60-inch flip tail. 

CAPACITY & WEIGHT

  • 80,000 LB OVERALL
  • CONCENTRATED: 50,000 LB IN 10'

OVERALL LENGTH & WIDTH

  • OVERALL LENGTH: 48' OR 53'
  • OVERALL WIDTH: 102"

GOOSENECK

  • 9' LONG FULL-WIDTH
  • 90° SLOPE
  • 16" KING PIN SETTING
  • 86" SWING CLEARANCE
  • 49" 5TH WHEEL HEIGHT
  • STEEL TREAD PLATE DECKING
  • (2) D-RINGS PER SIDE
  • 2 SPEED LANDING GEAR WITH HANDLE ON DRIVER SIDE
  • WET LINE HYDRAULICS TO RUN OFF TRUCK
  • HYDRAULIC LEVERS ON DRIVER SIDE
  • PLANETARY DRIVE 18,000 LB HYDRAULIC WINCH WITH 75' OF 1/2" CABLE & AIR KICK OUT
  • 2 FUNCTION WIRELESS REMOTE FOR WINCH
  • 2 TOOLBOXES WITH LIDS
  • 9' LONG POP-UP RAMP, DECK TO NECK
  • INTEGRATED FOOT STEP AND GRAB HANDLE, ON BOTH SIDES

MAIN DECK

  • T-I FLANGE, 80K WEB
  • 48' OAL: 30' 4" LONG
  • 53' OAL: 35' 4" LONG
  • 36" LOADED DECK HEIGHT
  • 1 3/8" RAISED ADITONG
  • 1/4" TREAD PLATE COVERED WHEELS
  • 10" & 8" JR. I-BEAM CROSS MEMBERS ON ALTERNATING 12" CENTERS
  • 18" FABRICATED I-BEAM SIDE MEMBERS
  • (5) D-RINGS PER SIDE
  • STAKE POCKETS AND CHAIN SLOTS ON ALTERNATING 24" CENTERS, SIDES
  • CHAIN SLOTS DOWN CENTER OF DECK ON 48" CENTERS

TAIL SECTION 

  • 13' 8" HYDRAULIC TAIL: 8' 8" PLATFORM 60" FOLD UNDER FLIP TAIL
  • AUTOMATIC FLIP TAIL LOCK
  • TRACTION AIDS
  • STAR TRACTION PLATE

SUSPENSION

  • 25,000 LB AIR RIDE

AXLES

  • (2) 25,000 LB NOMINAL
  • 49" AXLE SPACING
  • HUB PILOT, OUTBOARD DRUMS
  • 4S2M ABS
  • SPRING BRAKES ON 2 AXLES
  • 12 1/4" X 7 1/2" BRAKES
  • AUTO SLACK ADJUSTERS
  • AIR DUMP ON BOTH AXLES

WHEELS & TIRES

  • 6.75 X 17.5 STEEL RIMS
  • 245/ 70R/ 17.5 TIRES

LIGHTING

  • D.O.T. APPROVED 12V SEALED HARNESS
  • RUBBER MOUNTED LED LIGHTS
  • 3 TAIL LIGHT PACKAGE
  • (1) MID-TURN SIGNAL PER SIDE
  • (2) CLEARANCE LIGHTS PER  SIDE
  • 7 POLE ELECTRICAL SOCKET

PAINT

  • 1 YEAR WARRANTY
  • BLACK, IH RED, OR NEW CAT YELLOW
  • AIR & ELECTRIC DONE AFTER PAINT
  • MANY CUSTOM OPTIONS AVAILABLE